raschel machine

The Raschel machine is a warp knitting machine whose structure is oriented with the fabric stretching direction and the angle of the needle bar plane exceeding 140°.
Such machines are commonly used to weave curtains, tablecloths, bedspreads, blankets, lace strips, women's interior and exterior clothing, fishing nets, bags and other complex warp knit fabrics.
The high tension of the yarn does not directly affect the knitting needle, so that a dimensionally stable fabric and a low density fabric can be produced.

Product Details

I machine usage

The Raschel machine is a warp knitting machine whose structure is oriented with the fabric stretching direction and the angle of the needle bar plane exceeding 140°. Such machines are commonly used to weave curtains, tablecloths, bedspreads, blankets, lace strips, women's interior and exterior clothing, fishing nets, bags and other complex warp knit fabrics.

The high tension of the yarn does not directly affect the knitting needle, so that a dimensionally stable fabric and a low density fabric can be produced. In addition, it is a low tension weave with a short feed path. It can be used with a variety of different materials such as flat yarn, fiberglass, aramid, carbon fiber and wire. After cutting and finishing, a medium and long plush with a height of 5-25 mm can be formed, and the plush is full and soft, and the wool yarn is rounded and is not easy to fall off from the substrate.

Features:

1. Since the angle between the lace machine cloth and the knitting needle is about 170 degrees, it can be woven into warp yarn.

2. It must have a fabric pull. Because of the high tensile tension of the fabric, it is possible to produce a mesh fabric, a stretch fabric, and an elastic pleat fabric.

3. This machine adopts oil-immersed cam system, which makes the cam damage less and durable. Electric pumping and electric winding are used to make the delivery more stable.

4. Our machine's specified ambient temperature is 25 degrees Celsius (+/- 2 degrees) and the maximum air humidity is 65%. The floor load is between 3 and 5 tons per square metre, but these factors depend mainly on the type of machine involved and the length of the machine. Operational vibrations must be considered when installing this machine.

Application:

This machine is widely used in plush toys, fur coats, plush carpets, blankets and other products, such as flannel, coral fleece, round cashmere, PV velvet, artificial hair and so on.

II main machine equipment

1. Knocking-over part

Two latch needle bed,two knocking-over bed,two sinker needle bed,five guide bars(1for pile,4for ground),all equipped with guide needles and separate needle,sinker needle bed with sinker needles and wire 2pcs. 

2. Beam shaft

Beam shaft can be equipped with 4 sets ground bar yarn let off device and 1 set pile bar yarn let off device.beam shaft diameter isφ152mm,beam can use21″or 30″.

3. Yarn let off device

Two rollers positive yarn let-off device,change yarn amount by change gears,5 sets mechanical yarn let off box.

4. Pattern device

Seller provide pattern device according to buyer’s fabric process. 

5. Batching and take-up device

Multi-set batching roller,independent batching device driven by batching box. 

6. Electrical device

Three phrase AC power 380V/50Hz,inverter control speed,main motor2.2kw.

Related Products

Inquiry