hot air stenter machine

A hot air stenter machine is a machine or device for stretching or tensioning a fabric that enables the length and width of the tenter to reach a predetermined size.
This equipment can also be used for heat setting, for coating chemicals, and for adjusting chromatic aberrations.
The main function of the stenter is to stretch the fabric laterally to restore the uniform width of the fabric.

Product Details

Model no:JZR-3200 stenter machine equipment

Introduction:

A hot air stenter machine is a machine or device for stretching or tensioning a fabric that enables the length and width of the tenter to reach a predetermined size. This equipment can also be used for heat setting, for coating chemicals, and for adjusting chromatic aberrations. The main function of the stenter is to stretch the fabric laterally to restore the uniform width of the fabric.

Since natural fiber fabrics such as cotton yarn, silk, wool, etc. have a certain degree of wet heat plasticity, these fabrics are subjected to moist heat processing such as scouring, drifting, dyeing, water washing, etc. in the printing and dyeing process, and the warp direction is elongated and the weft direction is shortened. The surface became uneven. By the warming of the stenter and the application of the transverse drafting effect, the weft direction can be widened and uniform, so that the cloth surface is flat and beautiful, and the deformation of the fabric during the cutting and sewing process can be reduced.

I  range of application:

This machine is widely used in cotton, polyester cotton, blending and chemical fiber fabric knitting stenter.

II  machine working process:

Open width fabric entry→infrared centring device(HET)→two rollers padder→photoelectric weft straightener(HET)→machine head operation box(up and down overfeed device)→Infrared edge devices(HET)→Four fingers strip edge device(HET)→Racking handle up air pressure type brush overfeed device→portal frame operating button, instrumentation and monitoring→stenter oven(6 chambers) →air cooling→water cooling roller→Swing off and A type winding device.

III main technical data and specifications:

1、machine usage:suit for fabric stenter

2、machine model:JZR-3200

3、working width:3200mm(adjust range 1200-3100mm)

4、machine speed:10-60 m/min

5、chamber temp.:oil heating,max temp. 220℃

6、power supply:380V,50HZ

7、cloth load type:level track, needle plate type

8、chamber size:length*width*height:18m*4.9m*1.76m

9、cooling type:wind cooling and water roller cooling

10、fabric come out:swing off

11、width adjust way:adjust by 2.2kw motor and reducer,forepart area need adjust separately

12、wind adjust:inverter control each fan

13、speed adjust:inverter PLC touch screen control

14、machine control:portal frame, machine head running data display and fabric come out all controlled by monitor video, machine tail use PLC touch screen control running data and speed and emergency stop button  

Machine installed capacity:around 130kw

Inquiry

Related Products